Aminet 6/Aminet 6 - June 1995.iso/Aminet/dev/gcc/gcc263_src.lha/gcc-2.6.3/gcc.info-3

GNU Info File | 1994-11-23 | 49.7 KB | 1,271 lines

This is Info file gcc.info, produced by Makeinfo-1.55 from the input
file gcc.texi.

   This file documents the use and the internals of the GNU compiler.

   Published by the Free Software Foundation 675 Massachusetts Avenue
Cambridge, MA 02139 USA

   Copyright (C) 1988, 1989, 1992, 1993, 1994 Free Software Foundation,
Inc.

   Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

   Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided also
that the sections entitled "GNU General Public License," "Funding for
Free Software," and "Protect Your Freedom--Fight `Look And Feel'" are
included exactly as in the original, and provided that the entire
resulting derived work is distributed under the terms of a permission
notice identical to this one.

   Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that the sections entitled "GNU General Public
License," "Funding for Free Software," and "Protect Your Freedom--Fight
`Look And Feel'", and this permission notice, may be included in
translations approved by the Free Software Foundation instead of in the
original English.


File: gcc.info,  Node: Debugging Options,  Next: Optimize Options,  Prev: Warning Options,  Up: Invoking GCC

Options for Debugging Your Program or GNU CC
============================================

   GNU CC has various special options that are used for debugging
either your program or GCC:

`-g'
     Produce debugging information in the operating system's native
     format (stabs, COFF, XCOFF, or DWARF).  GDB can work with this
     debugging information.

     On most systems that use stabs format, `-g' enables use of extra
     debugging information that only GDB can use; this extra information
     makes debugging work better in GDB but will probably make other
     debuggers crash or refuse to read the program.  If you want to
     control for certain whether to generate the extra information, use
     `-gstabs+', `-gstabs', `-gxcoff+', `-gxcoff', `-gdwarf+', or
     `-gdwarf' (see below).

     Unlike most other C compilers, GNU CC allows you to use `-g' with
     `-O'.  The shortcuts taken by optimized code may occasionally
     produce surprising results: some variables you declared may not
     exist at all; flow of control may briefly move where you did not
     expect it; some statements may not be executed because they
     compute constant results or their values were already at hand;
     some statements may execute in different places because they were
     moved out of loops.

     Nevertheless it proves possible to debug optimized output.  This
     makes it reasonable to use the optimizer for programs that might
     have bugs.

     The following options are useful when GNU CC is generated with the
     capability for more than one debugging format.

`-ggdb'
     Produce debugging information in the native format (if that is
     supported), including GDB extensions if at all possible.

`-gstabs'
     Produce debugging information in stabs format (if that is
     supported), without GDB extensions.  This is the format used by
     DBX on most BSD systems.  On MIPS, Alpha and System V Release 4
     systems this option produces stabs debugging output which is not
     understood by DBX or SDB.  On System V Release 4 systems this
     option requires the GNU assembler.

`-gstabs+'
     Produce debugging information in stabs format (if that is
     supported), using GNU extensions understood only by the GNU
     debugger (GDB).  The use of these extensions is likely to make
     other debuggers crash or refuse to read the program.

`-gcoff'
     Produce debugging information in COFF format (if that is
     supported).  This is the format used by SDB on most System V
     systems prior to System V Release 4.

`-gxcoff'
     Produce debugging information in XCOFF format (if that is
     supported).  This is the format used by the DBX debugger on IBM
     RS/6000 systems.

`-gxcoff+'
     Produce debugging information in XCOFF format (if that is
     supported), using GNU extensions understood only by the GNU
     debugger (GDB).  The use of these extensions is likely to make
     other debuggers crash or refuse to read the program.

`-gdwarf'
     Produce debugging information in DWARF format (if that is
     supported).  This is the format used by SDB on most System V
     Release 4 systems.

`-gdwarf+'
     Produce debugging information in DWARF format (if that is
     supported), using GNU extensions understood only by the GNU
     debugger (GDB).  The use of these extensions is likely to make
     other debuggers crash or refuse to read the program.

`-gLEVEL'
`-ggdbLEVEL'
`-gstabsLEVEL'
`-gcoffLEVEL'
`-gxcoffLEVEL'
`-gdwarfLEVEL'
     Request debugging information and also use LEVEL to specify how
     much information.  The default level is 2.

     Level 1 produces minimal information, enough for making backtraces
     in parts of the program that you don't plan to debug.  This
     includes descriptions of functions and external variables, but no
     information about local variables and no line numbers.

     Level 3 includes extra information, such as all the macro
     definitions present in the program.  Some debuggers support macro
     expansion when you use `-g3'.

`-p'
     Generate extra code to write profile information suitable for the
     analysis program `prof'.  You must use this option when compiling
     the source files you want data about, and you must also use it when
     linking.

`-pg'
     Generate extra code to write profile information suitable for the
     analysis program `gprof'.  You must use this option when compiling
     the source files you want data about, and you must also use it when
     linking.

`-a'
     Generate extra code to write profile information for basic blocks,
     which will record the number of times each basic block is
     executed, the basic block start address, and the function name
     containing the basic block.  If `-g' is used, the line number and
     filename of the start of the basic block will also be recorded.
     If not overridden by the machine description, the default action is
     to append to the text file `bb.out'.

     This data could be analyzed by a program like `tcov'.  Note,
     however, that the format of the data is not what `tcov' expects.
     Eventually GNU `gprof' should be extended to process this data.

`-dLETTERS'
     Says to make debugging dumps during compilation at times specified
     by LETTERS.  This is used for debugging the compiler.  The file
     names for most of the dumps are made by appending a word to the
     source file name (e.g.  `foo.c.rtl' or `foo.c.jump').  Here are the
     possible letters for use in LETTERS, and their meanings:

    `M'
          Dump all macro definitions, at the end of preprocessing, and
          write no output.

    `N'
          Dump all macro names, at the end of preprocessing.

    `D'
          Dump all macro definitions, at the end of preprocessing, in
          addition to normal output.

    `y'
          Dump debugging information during parsing, to standard error.

    `r'
          Dump after RTL generation, to `FILE.rtl'.

    `x'
          Just generate RTL for a function instead of compiling it.
          Usually used with `r'.

    `j'
          Dump after first jump optimization, to `FILE.jump'.

    `s'
          Dump after CSE (including the jump optimization that sometimes
          follows CSE), to `FILE.cse'.

    `L'
          Dump after loop optimization, to `FILE.loop'.

    `t'
          Dump after the second CSE pass (including the jump
          optimization that sometimes follows CSE), to `FILE.cse2'.

    `f'
          Dump after flow analysis, to `FILE.flow'.

    `c'
          Dump after instruction combination, to the file
          `FILE.combine'.

    `S'
          Dump after the first instruction scheduling pass, to
          `FILE.sched'.

    `l'
          Dump after local register allocation, to `FILE.lreg'.

    `g'
          Dump after global register allocation, to `FILE.greg'.

    `R'
          Dump after the second instruction scheduling pass, to
          `FILE.sched2'.

    `J'
          Dump after last jump optimization, to `FILE.jump2'.

    `d'
          Dump after delayed branch scheduling, to `FILE.dbr'.

    `k'
          Dump after conversion from registers to stack, to
          `FILE.stack'.

    `a'
          Produce all the dumps listed above.

    `m'
          Print statistics on memory usage, at the end of the run, to
          standard error.

    `p'
          Annotate the assembler output with a comment indicating which
          pattern and alternative was used.

`-fpretend-float'
     When running a cross-compiler, pretend that the target machine
     uses the same floating point format as the host machine.  This
     causes incorrect output of the actual floating constants, but the
     actual instruction sequence will probably be the same as GNU CC
     would make when running on the target machine.

`-save-temps'
     Store the usual "temporary" intermediate files permanently; place
     them in the current directory and name them based on the source
     file.  Thus, compiling `foo.c' with `-c -save-temps' would produce
     files `foo.i' and `foo.s', as well as `foo.o'.

`-print-file-name=LIBRARY'
     Print the full absolute name of the library file LIBRARY that
     would be used when linking--and don't do anything else.  With this
     option, GNU CC does not compile or link anything; it just prints
     the file name.

`-print-prog-name=PROGRAM'
     Like `-print-file-name', but searches for a program such as `cpp'.

`-print-libgcc-file-name'
     Same as `-print-file-name=libgcc.a'.

     This is useful when you use `-nostdlib' but you do want to link
     with `libgcc.a'.  You can do

          gcc -nostdlib FILES... `gcc -print-libgcc-file-name`


File: gcc.info,  Node: Optimize Options,  Next: Preprocessor Options,  Prev: Debugging Options,  Up: Invoking GCC

Options That Control Optimization
=================================

   These options control various sorts of optimizations:

`-O'
`-O1'
     Optimize.  Optimizing compilation takes somewhat more time, and a
     lot more memory for a large function.

     Without `-O', the compiler's goal is to reduce the cost of
     compilation and to make debugging produce the expected results.
     Statements are independent: if you stop the program with a
     breakpoint between statements, you can then assign a new value to
     any variable or change the program counter to any other statement
     in the function and get exactly the results you would expect from
     the source code.

     Without `-O', the compiler only allocates variables declared
     `register' in registers.  The resulting compiled code is a little
     worse than produced by PCC without `-O'.

     With `-O', the compiler tries to reduce code size and execution
     time.

     When you specify `-O', the compiler turns on `-fthread-jumps' and
     `-fdefer-pop' on all machines.  The compiler turns on
     `-fdelayed-branch' on machines that have delay slots, and
     `-fomit-frame-pointer' on machines that can support debugging even
     without a frame pointer.  On some machines the compiler also turns
     on other flags.

`-O2'
     Optimize even more.  GNU CC performs nearly all supported
     optimizations that do not involve a space-speed tradeoff.  The
     compiler does not perform loop unrolling or function inlining when
     you specify `-O2'.  As compared to `-O', this option increases
     both compilation time and the performance of the generated code.

     `-O2' turns on all optional optimizations except for loop unrolling
     and function inlining.  It also turns on frame pointer elimination
     on machines where doing so does not interfer with debugging.

`-O3'
     Optimize yet more.  `-O3' turns on all optimizations specified by
     `-O2' and also turns on the `inline-functions' option.

`-O0'
     Do not optimize.

     If you use multiple `-O' options, with or without level numbers,
     the last such option is the one that is effective.

   Options of the form `-fFLAG' specify machine-independent flags.
Most flags have both positive and negative forms; the negative form of
`-ffoo' would be `-fno-foo'.  In the table below, only one of the forms
is listed--the one which is not the default.  You can figure out the
other form by either removing `no-' or adding it.

`-ffloat-store'
     Do not store floating point variables in registers, and inhibit
     other options that might change whether a floating point value is
     taken from a register or memory.

     This option prevents undesirable excess precision on machines such
     as the 68000 where the floating registers (of the 68881) keep more
     precision than a `double' is supposed to have.  For most programs,
     the excess precision does only good, but a few programs rely on the
     precise definition of IEEE floating point.  Use `-ffloat-store' for
     such programs.

`-fno-default-inline'
     Do not make member functions inline by default merely because they
     are defined inside the class scope (C++ only).  Otherwise, when
     you specify `-O', member functions defined inside class scope are
     compiled inline by default; i.e., you don't need to add `inline'
     in front of the member function name.

`-fno-defer-pop'
     Always pop the arguments to each function call as soon as that
     function returns.  For machines which must pop arguments after a
     function call, the compiler normally lets arguments accumulate on
     the stack for several function calls and pops them all at once.

`-fforce-mem'
     Force memory operands to be copied into registers before doing
     arithmetic on them.  This may produce better code by making all
     memory references potential common subexpressions.  When they are
     not common subexpressions, instruction combination should
     eliminate the separate register-load.  I am interested in hearing
     about the difference this makes.

`-fforce-addr'
     Force memory address constants to be copied into registers before
     doing arithmetic on them.  This may produce better code just as
     `-fforce-mem' may.  I am interested in hearing about the
     difference this makes.

`-fomit-frame-pointer'
     Don't keep the frame pointer in a register for functions that
     don't need one.  This avoids the instructions to save, set up and
     restore frame pointers; it also makes an extra register available
     in many functions.  *It also makes debugging impossible on some
     machines.*

     On some machines, such as the Vax, this flag has no effect, because
     the standard calling sequence automatically handles the frame
     pointer and nothing is saved by pretending it doesn't exist.  The
     machine-description macro `FRAME_POINTER_REQUIRED' controls
     whether a target machine supports this flag.  *Note Registers::.

`-fno-inline'
     Don't pay attention to the `inline' keyword.  Normally this option
     is used to keep the compiler from expanding any functions inline.
     Note that if you are not optimizing, no functions can be expanded
     inline.

`-finline-functions'
     Integrate all simple functions into their callers.  The compiler
     heuristically decides which functions are simple enough to be worth
     integrating in this way.

     If all calls to a given function are integrated, and the function
     is declared `static', then the function is normally not output as
     assembler code in its own right.

`-fkeep-inline-functions'
     Even if all calls to a given function are integrated, and the
     function is declared `static', nevertheless output a separate
     run-time callable version of the function.

`-fno-function-cse'
     Do not put function addresses in registers; make each instruction
     that calls a constant function contain the function's address
     explicitly.

     This option results in less efficient code, but some strange hacks
     that alter the assembler output may be confused by the
     optimizations performed when this option is not used.

`-ffast-math'
     This option allows GCC to violate some ANSI or IEEE rules and/or
     specifications in the interest of optimizing code for speed.  For
     example, it allows the compiler to assume arguments to the `sqrt'
     function are non-negative numbers and that no floating-point values
     are NaNs.

     This option should never be turned on by any `-O' option since it
     can result in incorrect output for programs which depend on an
     exact implementation of IEEE or ANSI rules/specifications for math
     functions.

   The following options control specific optimizations.  The `-O2'
option turns on all of these optimizations except `-funroll-loops' and
`-funroll-all-loops'.  On most machines, the `-O' option turns on the
`-fthread-jumps' and `-fdelayed-branch' options, but specific machines
may handle it differently.

   You can use the following flags in the rare cases when "fine-tuning"
of optimizations to be performed is desired.

`-fstrength-reduce'
     Perform the optimizations of loop strength reduction and
     elimination of iteration variables.

`-fthread-jumps'
     Perform optimizations where we check to see if a jump branches to a
     location where another comparison subsumed by the first is found.
     If so, the first branch is redirected to either the destination of
     the second branch or a point immediately following it, depending
     on whether the condition is known to be true or false.

`-fcse-follow-jumps'
     In common subexpression elimination, scan through jump instructions
     when the target of the jump is not reached by any other path.  For
     example, when CSE encounters an `if' statement with an `else'
     clause, CSE will follow the jump when the condition tested is
     false.

`-fcse-skip-blocks'
     This is similar to `-fcse-follow-jumps', but causes CSE to follow
     jumps which conditionally skip over blocks.  When CSE encounters a
     simple `if' statement with no else clause, `-fcse-skip-blocks'
     causes CSE to follow the jump around the body of the `if'.

`-frerun-cse-after-loop'
     Re-run common subexpression elimination after loop optimizations
     has been performed.

`-fexpensive-optimizations'
     Perform a number of minor optimizations that are relatively
     expensive.

`-fdelayed-branch'
     If supported for the target machine, attempt to reorder
     instructions to exploit instruction slots available after delayed
     branch instructions.

`-fschedule-insns'
     If supported for the target machine, attempt to reorder
     instructions to eliminate execution stalls due to required data
     being unavailable.  This helps machines that have slow floating
     point or memory load instructions by allowing other instructions
     to be issued until the result of the load or floating point
     instruction is required.

`-fschedule-insns2'
     Similar to `-fschedule-insns', but requests an additional pass of
     instruction scheduling after register allocation has been done.
     This is especially useful on machines with a relatively small
     number of registers and where memory load instructions take more
     than one cycle.

`-fcaller-saves'
     Enable values to be allocated in registers that will be clobbered
     by function calls, by emitting extra instructions to save and
     restore the registers around such calls.  Such allocation is done
     only when it seems to result in better code than would otherwise
     be produced.

     This option is enabled by default on certain machines, usually
     those which have no call-preserved registers to use instead.

`-funroll-loops'
     Perform the optimization of loop unrolling.  This is only done for
     loops whose number of iterations can be determined at compile time
     or run time.  `-funroll-loop' implies both `-fstrength-reduce' and
     `-frerun-cse-after-loop'.

`-funroll-all-loops'
     Perform the optimization of loop unrolling.  This is done for all
     loops and usually makes programs run more slowly.
     `-funroll-all-loops' implies `-fstrength-reduce' as well as
     `-frerun-cse-after-loop'.

`-fno-peephole'
     Disable any machine-specific peephole optimizations.


File: gcc.info,  Node: Preprocessor Options,  Next: Assembler Options,  Prev: Optimize Options,  Up: Invoking GCC

Options Controlling the Preprocessor
====================================

   These options control the C preprocessor, which is run on each C
source file before actual compilation.

   If you use the `-E' option, nothing is done except preprocessing.
Some of these options make sense only together with `-E' because they
cause the preprocessor output to be unsuitable for actual compilation.

`-include FILE'
     Process FILE as input before processing the regular input file.
     In effect, the contents of FILE are compiled first.  Any `-D' and
     `-U' options on the command line are always processed before
     `-include FILE', regardless of the order in which they are
     written.  All the `-include' and `-imacros' options are processed
     in the order in which they are written.

`-imacros FILE'
     Process FILE as input, discarding the resulting output, before
     processing the regular input file.  Because the output generated
     from FILE is discarded, the only effect of `-imacros FILE' is to
     make the macros defined in FILE available for use in the main
     input.

     Any `-D' and `-U' options on the command line are always processed
     before `-imacros FILE', regardless of the order in which they are
     written.  All the `-include' and `-imacros' options are processed
     in the order in which they are written.

`-idirafter DIR'
     Add the directory DIR to the second include path.  The directories
     on the second include path are searched when a header file is not
     found in any of the directories in the main include path (the one
     that `-I' adds to).

`-iprefix PREFIX'
     Specify PREFIX as the prefix for subsequent `-iwithprefix' options.

`-iwithprefix DIR'
     Add a directory to the second include path.  The directory's name
     is made by concatenating PREFIX and DIR, where PREFIX was
     specified previously with `-iprefix'.  If you have not specified a
     prefix yet, the directory containing the installed passes of the
     compiler is used as the default.

`-iwithprefixbefore DIR'
     Add a directory to the main include path.  The directory's name is
     made by concatenating PREFIX and DIR, as in the case of
     `-iwithprefix'.

`-isystem DIR'
     Add a directory to the beginning of the second include path,
     marking it as a system directory, so that it gets the same special
     treatment as is applied to the standard system directories.

`-nostdinc'
     Do not search the standard system directories for header files.
     Only the directories you have specified with `-I' options (and the
     current directory, if appropriate) are searched.  *Note Directory
     Options::, for information on `-I'.

     By using both `-nostdinc' and `-I-', you can limit the include-file
     search path to only those directories you specify explicitly.

`-undef'
     Do not predefine any nonstandard macros.  (Including architecture
     flags).

`-E'
     Run only the C preprocessor.  Preprocess all the C source files
     specified and output the results to standard output or to the
     specified output file.

`-C'
     Tell the preprocessor not to discard comments.  Used with the `-E'
     option.

`-P'
     Tell the preprocessor not to generate `#line' commands.  Used with
     the `-E' option.

`-M'
     Tell the preprocessor to output a rule suitable for `make'
     describing the dependencies of each object file.  For each source
     file, the preprocessor outputs one `make'-rule whose target is the
     object file name for that source file and whose dependencies are
     all the `#include' header files it uses.  This rule may be a
     single line or may be continued with `\'-newline if it is long.
     The list of rules is printed on standard output instead of the
     preprocessed C program.

     `-M' implies `-E'.

     Another way to specify output of a `make' rule is by setting the
     environment variable `DEPENDENCIES_OUTPUT' (*note Environment
     Variables::.).

`-MM'
     Like `-M' but the output mentions only the user header files
     included with `#include "FILE"'.  System header files included
     with `#include <FILE>' are omitted.

`-MD'
     Like `-M' but the dependency information is written to a file made
     by replacing ".c" with ".d" at the end of the input file names.
     This is in addition to compiling the file as specified--`-MD' does
     not inhibit ordinary compilation the way `-M' does.

     In Mach, you can use the utility `md' to merge multiple dependency
     files into a single dependency file suitable for using with the
     `make' command.

`-MMD'
     Like `-MD' except mention only user header files, not system
     header files.

`-MG'
     Treat missing header files as generated files and assume they live
     in the same directory as the source file.  If you specify `-MG',
     you must also specify either `-M' or `-MM'.  `-MG' is not
     supported with `-MD' or `-MMD'.

`-H'
     Print the name of each header file used, in addition to other
     normal activities.

`-AQUESTION(ANSWER)'
     Assert the answer ANSWER for QUESTION, in case it is tested with a
     preprocessor conditional such as `#if #QUESTION(ANSWER)'.  `-A-'
     disables the standard assertions that normally describe the target
     machine.

`-DMACRO'
     Define macro MACRO with the string `1' as its definition.

`-DMACRO=DEFN'
     Define macro MACRO as DEFN.  All instances of `-D' on the command
     line are processed before any `-U' options.

`-UMACRO'
     Undefine macro MACRO.  `-U' options are evaluated after all `-D'
     options, but before any `-include' and `-imacros' options.

`-dM'
     Tell the preprocessor to output only a list of the macro
     definitions that are in effect at the end of preprocessing.  Used
     with the `-E' option.

`-dD'
     Tell the preprocessing to pass all macro definitions into the
     output, in their proper sequence in the rest of the output.

`-dN'
     Like `-dD' except that the macro arguments and contents are
     omitted.  Only `#define NAME' is included in the output.

`-trigraphs'
     Support ANSI C trigraphs.  The `-ansi' option also has this effect.

`-Wp,OPTION'
     Pass OPTION as an option to the preprocessor.  If OPTION contains
     commas, it is split into multiple options at the commas.


File: gcc.info,  Node: Assembler Options,  Next: Link Options,  Prev: Preprocessor Options,  Up: Invoking GCC

Passing Options to the Assembler
================================

   You can pass options to the assembler.

`-Wa,OPTION'
     Pass OPTION as an option to the assembler.  If OPTION contains
     commas, it is split into multiple options at the commas.


File: gcc.info,  Node: Link Options,  Next: Directory Options,  Prev: Assembler Options,  Up: Invoking GCC

Options for Linking
===================

   These options come into play when the compiler links object files
into an executable output file.  They are meaningless if the compiler is
not doing a link step.

`OBJECT-FILE-NAME'
     A file name that does not end in a special recognized suffix is
     considered to name an object file or library.  (Object files are
     distinguished from libraries by the linker according to the file
     contents.)  If linking is done, these object files are used as
     input to the linker.

`-c'
`-S'
`-E'
     If any of these options is used, then the linker is not run, and
     object file names should not be used as arguments.  *Note Overall
     Options::.

`-lLIBRARY'
     Search the library named LIBRARY when linking.

     It makes a difference where in the command you write this option;
     the linker searches processes libraries and object files in the
     order they are specified.  Thus, `foo.o -lz bar.o' searches
     library `z' after file `foo.o' but before `bar.o'.  If `bar.o'
     refers to functions in `z', those functions may not be loaded.

     The linker searches a standard list of directories for the library,
     which is actually a file named `libLIBRARY.a'.  The linker then
     uses this file as if it had been specified precisely by name.

     The directories searched include several standard system
     directories plus any that you specify with `-L'.

     Normally the files found this way are library files--archive files
     whose members are object files.  The linker handles an archive
     file by scanning through it for members which define symbols that
     have so far been referenced but not defined.  But if the file that
     is found is an ordinary object file, it is linked in the usual
     fashion.  The only difference between using an `-l' option and
     specifying a file name is that `-l' surrounds LIBRARY with `lib'
     and `.a' and searches several directories.

`-lobjc'
     You need this special case of the `-l' option in order to link an
     Objective C program.

`-nostartfiles'
     Do not use the standard system startup files when linking.  The
     standard libraries are used normally.

`-nostdlib'
     Do not use the standard system libraries and startup files when
     linking.  Only the files you specify will be passed to the linker.

     One of the standard libraries bypassed by `-nostdlib' is
     `libgcc.a', a library of internal subroutines that GNU CC uses to
     overcome shortcomings of particular machines, or special needs for
     some languages.  (*Note Interfacing to GNU CC Output: Interface,
     for more discussion of `libgcc.a'.) In most cases, you need
     `libgcc.a' even when you want to avoid other standard libraries.
     In other words, when you specify `-nostdlib' you should usually
     specify `-lgcc' as well.  This ensures that you have no unresolved
     references to internal GNU CC library subroutines.  (For example,
     `__main', used to ensure C++ constructors will be called; *note
     `collect2': Collect2..)

`-s'
     Remove all symbol table and relocation information from the
     executable.

`-static'
     On systems that support dynamic linking, this prevents linking
     with the shared libraries.  On other systems, this option has no
     effect.

`-shared'
     Produce a shared object which can then be linked with other
     objects to form an executable.  Only a few systems support this
     option.

`-symbolic'
     Bind references to global symbols when building a shared object.
     Warn about any unresolved references (unless overridden by the
     link editor option `-Xlinker -z -Xlinker defs').  Only a few
     systems support this option.

`-Xlinker OPTION'
     Pass OPTION as an option to the linker.  You can use this to
     supply system-specific linker options which GNU CC does not know
     how to recognize.

     If you want to pass an option that takes an argument, you must use
     `-Xlinker' twice, once for the option and once for the argument.
     For example, to pass `-assert definitions', you must write
     `-Xlinker -assert -Xlinker definitions'.  It does not work to write
     `-Xlinker "-assert definitions"', because this passes the entire
     string as a single argument, which is not what the linker expects.

`-Wl,OPTION'
     Pass OPTION as an option to the linker.  If OPTION contains
     commas, it is split into multiple options at the commas.

`-u SYMBOL'
     Pretend the symbol SYMBOL is undefined, to force linking of
     library modules to define it.  You can use `-u' multiple times with
     different symbols to force loading of additional library modules.


File: gcc.info,  Node: Directory Options,  Next: Target Options,  Prev: Link Options,  Up: Invoking GCC

Options for Directory Search
============================

   These options specify directories to search for header files, for
libraries and for parts of the compiler:

`-IDIR'
     Append directory DIR to the list of directories searched for
     include files.

`-I-'
     Any directories you specify with `-I' options before the `-I-'
     option are searched only for the case of `#include "FILE"'; they
     are not searched for `#include <FILE>'.

     If additional directories are specified with `-I' options after
     the `-I-', these directories are searched for all `#include'
     directives.  (Ordinarily *all* `-I' directories are used this way.)

     In addition, the `-I-' option inhibits the use of the current
     directory (where the current input file came from) as the first
     search directory for `#include "FILE"'.  There is no way to
     override this effect of `-I-'.  With `-I.' you can specify
     searching the directory which was current when the compiler was
     invoked.  That is not exactly the same as what the preprocessor
     does by default, but it is often satisfactory.

     `-I-' does not inhibit the use of the standard system directories
     for header files.  Thus, `-I-' and `-nostdinc' are independent.

`-LDIR'
     Add directory DIR to the list of directories to be searched for
     `-l'.

`-BPREFIX'
     This option specifies where to find the executables, libraries,
     include files, and data files of the compiler itself.

     The compiler driver program runs one or more of the subprograms
     `cpp', `cc1', `as' and `ld'.  It tries PREFIX as a prefix for each
     program it tries to run, both with and without `MACHINE/VERSION/'
     (*note Target Options::.).

     For each subprogram to be run, the compiler driver first tries the
     `-B' prefix, if any.  If that name is not found, or if `-B' was
     not specified, the driver tries two standard prefixes, which are
     `/usr/lib/gcc/' and `/usr/local/lib/gcc-lib/'.  If neither of
     those results in a file name that is found, the unmodified program
     name is searched for using the directories specified in your
     `PATH' environment variable.

     `-B' prefixes that effectively specify directory names also apply
     to libraries in the linker, because the compiler translates these
     options into `-L' options for the linker.  They also apply to
     includes files in the preprocessor, because the compiler
     translates these options into `-isystem' options for the
     preprocessor.  In this case, the compiler appends `include' to the
     prefix.

     The run-time support file `libgcc.a' can also be searched for using
     the `-B' prefix, if needed.  If it is not found there, the two
     standard prefixes above are tried, and that is all.  The file is
     left out of the link if it is not found by those means.

     Another way to specify a prefix much like the `-B' prefix is to use
     the environment variable `GCC_EXEC_PREFIX'.  *Note Environment
     Variables::.


File: gcc.info,  Node: Target Options,  Next: Submodel Options,  Prev: Directory Options,  Up: Invoking GCC

Specifying Target Machine and Compiler Version
==============================================

   By default, GNU CC compiles code for the same type of machine that
you are using.  However, it can also be installed as a cross-compiler,
to compile for some other type of machine.  In fact, several different
configurations of GNU CC, for different target machines, can be
installed side by side.  Then you specify which one to use with the
`-b' option.

   In addition, older and newer versions of GNU CC can be installed side
by side.  One of them (probably the newest) will be the default, but
you may sometimes wish to use another.

`-b MACHINE'
     The argument MACHINE specifies the target machine for compilation.
     This is useful when you have installed GNU CC as a cross-compiler.

     The value to use for MACHINE is the same as was specified as the
     machine type when configuring GNU CC as a cross-compiler.  For
     example, if a cross-compiler was configured with `configure
     i386v', meaning to compile for an 80386 running System V, then you
     would specify `-b i386v' to run that cross compiler.

     When you do not specify `-b', it normally means to compile for the
     same type of machine that you are using.

`-V VERSION'
     The argument VERSION specifies which version of GNU CC to run.
     This is useful when multiple versions are installed.  For example,
     VERSION might be `2.0', meaning to run GNU CC version 2.0.

     The default version, when you do not specify `-V', is controlled
     by the way GNU CC is installed.  Normally, it will be a version
     that is recommended for general use.

   The `-b' and `-V' options actually work by controlling part of the
file name used for the executable files and libraries used for
compilation.  A given version of GNU CC, for a given target machine, is
normally kept in the directory `/usr/local/lib/gcc-lib/MACHINE/VERSION'.

   Thus, sites can customize the effect of `-b' or `-V' either by
changing the names of these directories or adding alternate names (or
symbolic links).  If in directory `/usr/local/lib/gcc-lib/' the file
`80386' is a link to the file `i386v', then `-b 80386' becomes an alias
for `-b i386v'.

   In one respect, the `-b' or `-V' do not completely change to a
different compiler: the top-level driver program `gcc' that you
originally invoked continues to run and invoke the other executables
(preprocessor, compiler per se, assembler and linker) that do the real
work.  However, since no real work is done in the driver program, it
usually does not matter that the driver program in use is not the one
for the specified target and version.

   The only way that the driver program depends on the target machine is
in the parsing and handling of special machine-specific options.
However, this is controlled by a file which is found, along with the
other executables, in the directory for the specified version and
target machine.  As a result, a single installed driver program adapts
to any specified target machine and compiler version.

   The driver program executable does control one significant thing,
however: the default version and target machine.  Therefore, you can
install different instances of the driver program, compiled for
different targets or versions, under different names.

   For example, if the driver for version 2.0 is installed as `ogcc'
and that for version 2.1 is installed as `gcc', then the command `gcc'
will use version 2.1 by default, while `ogcc' will use 2.0 by default.
However, you can choose either version with either command with the
`-V' option.


File: gcc.info,  Node: Submodel Options,  Next: Code Gen Options,  Prev: Target Options,  Up: Invoking GCC

Hardware Models and Configurations
==================================

   Earlier we discussed the standard option `-b' which chooses among
different installed compilers for completely different target machines,
such as Vax vs. 68000 vs. 80386.

   In addition, each of these target machine types can have its own
special options, starting with `-m', to choose among various hardware
models or configurations--for example, 68010 vs 68020, floating
coprocessor or none.  A single installed version of the compiler can
compile for any model or configuration, according to the options
specified.

   Some configurations of the compiler also support additional special
options, usually for compatibility with other compilers on the same
platform.

   These options are defined by the macro `TARGET_SWITCHES' in the
machine description.  The default for the options is also defined by
that macro, which enables you to change the defaults.

* Menu:

* M680x0 Options::
* VAX Options::
* SPARC Options::
* Convex Options::
* AMD29K Options::
* ARM Options::
* M88K Options::
* RS/6000 and PowerPC Options::
* RT Options::
* MIPS Options::
* i386 Options::
* HPPA Options::
* Intel 960 Options::
* DEC Alpha Options::
* Clipper Options::
* H8/300 Options::
* System V Options::


File: gcc.info,  Node: M680x0 Options,  Next: VAX Options,  Up: Submodel Options

M680x0 Options
--------------

   These are the `-m' options defined for the 68000 series.  The default
values for these options depends on which style of 68000 was selected
when the compiler was configured; the defaults for the most common
choices are given below.

`-m68000'
`-mc68000'
     Generate output for a 68000.  This is the default when the
     compiler is configured for 68000-based systems.

`-m68020'
`-mc68020'
     Generate output for a 68020.  This is the default when the
     compiler is configured for 68020-based systems.

`-m68881'
     Generate output containing 68881 instructions for floating point.
     This is the default for most 68020 systems unless `-nfp' was
     specified when the compiler was configured.

`-m68030'
     Generate output for a 68030.  This is the default when the
     compiler is configured for 68030-based systems.

`-m68040'
     Generate output for a 68040.  This is the default when the
     compiler is configured for 68040-based systems.

     This option inhibits the use of 68881/68882 instructions that have
     to be emulated by software on the 68040.  If your 68040 does not
     have code to emulate those instructions, use `-m68040'.

`-m68020-40'
     Generate output for a 68040, without using any of the new
     instructions.  This results in code which can run relatively
     efficiently on either a 68020/68881 or a 68030 or a 68040.  The
     generated code does use the 68881 instructions that are emulated
     on the 68040.

`-mfpa'
     Generate output containing Sun FPA instructions for floating point.

`-msoft-float'
     Generate output containing library calls for floating point.
     *Warning:* the requisite libraries are not part of GNU CC.
     Normally the facilities of the machine's usual C compiler are
     used, but this can't be done directly in cross-compilation.  You
     must make your own arrangements to provide suitable library
     functions for cross-compilation.

`-mshort'
     Consider type `int' to be 16 bits wide, like `short int'.

`-mnobitfield'
     Do not use the bit-field instructions.  The `-m68000' option
     implies `-mnobitfield'.

`-mbitfield'
     Do use the bit-field instructions.  The `-m68020' option implies
     `-mbitfield'.  This is the default if you use a configuration
     designed for a 68020.

`-mrtd'
     Use a different function-calling convention, in which functions
     that take a fixed number of arguments return with the `rtd'
     instruction, which pops their arguments while returning.  This
     saves one instruction in the caller since there is no need to pop
     the arguments there.

     This calling convention is incompatible with the one normally used
     on Unix, so you cannot use it if you need to call libraries
     compiled with the Unix compiler.

     Also, you must provide function prototypes for all functions that
     take variable numbers of arguments (including `printf'); otherwise
     incorrect code will be generated for calls to those functions.

     In addition, seriously incorrect code will result if you call a
     function with too many arguments.  (Normally, extra arguments are
     harmlessly ignored.)

     The `rtd' instruction is supported by the 68010 and 68020
     processors, but not by the 68000.


File: gcc.info,  Node: VAX Options,  Next: SPARC Options,  Prev: M680x0 Options,  Up: Submodel Options

VAX Options
-----------

   These `-m' options are defined for the Vax:

`-munix'
     Do not output certain jump instructions (`aobleq' and so on) that
     the Unix assembler for the Vax cannot handle across long ranges.

`-mgnu'
     Do output those jump instructions, on the assumption that you will
     assemble with the GNU assembler.

`-mg'
     Output code for g-format floating point numbers instead of
     d-format.


File: gcc.info,  Node: SPARC Options,  Next: Convex Options,  Prev: VAX Options,  Up: Submodel Options

SPARC Options
-------------

   These `-m' switches are supported on the SPARC:

`-mno-app-regs'
`-mapp-regs'
     Specify `-mapp-regs' to generate output using the global registers
     2 through 4, which the SPARC SVR4 ABI reserves for applications.
     This is the default.

     To be fully SVR4 ABI compliant at the cost of some performance
     loss, specify `-mno-app-regs'.  You should compile libraries and
     system software with this option.

`-mfpu'
`-mhard-float'
     Generate output containing floating point instructions.  This is
     the default.

`-mno-fpu'
`-msoft-float'
     Generate output containing library calls for floating point.
     *Warning:* there is no GNU floating-point library for SPARC.
     Normally the facilities of the machine's usual C compiler are
     used, but this cannot be done directly in cross-compilation.  You
     must make your own arrangements to provide suitable library
     functions for cross-compilation.

     `-msoft-float' changes the calling convention in the output file;
     therefore, it is only useful if you compile *all* of a program with
     this option.  In particular, you need to compile `libgcc.a', the
     library that comes with GNU CC, with `-msoft-float' in order for
     this to work.

`-mhard-quad-float'
     Generate output containing quad-word (long double) floating point
     instructions.

`-msoft-quad-float'
     Generate output containing library calls for quad-word (long
     double) floating point instructions.  The functions called are
     those specified in the SPARC ABI.  This is the default.

     As of this writing, there are no sparc implementations that have
     hardware support for the quad-word floating point instructions.
     They all invoke a trap handler for one of these instructions, and
     then the trap handler emulates the effect of the instruction.
     Because of the trap handler overhead, this is much slower than
     calling the ABI library routines.  Thus the `-msoft-quad-float'
     option is the default.

`-mno-epilogue'
`-mepilogue'
     With `-mepilogue' (the default), the compiler always emits code for
     function exit at the end of each function.  Any function exit in
     the middle of the function (such as a return statement in C) will
     generate a jump to the exit code at the end of the function.

     With `-mno-epilogue', the compiler tries to emit exit code inline
     at every function exit.

`-mno-flat'
`-mflat'
     With `-mflat', the compiler does not generate save/restore
     instructions and will use a "flat" or single register window
     calling convention.  This model uses %i7 as the frame pointer and
     is compatible with the normal register window model.  Code from
     either may be intermixed although debugger support is still
     incomplete.  The local registers and the input registers (0-5) are
     still treated as "call saved" registers and will be saved on the
     stack as necessary.

     With `-mno-flat' (the default), the compiler emits save/restore
     instructions (except for leaf functions) and is the normal mode of
     operation.

`-mno-unaligned-doubles'
`-munaligned-doubles'
     Assume that doubles have 8 byte alignment.  This is the default.

     With `-munaligned-doubles', GNU CC assumes that doubles have 8 byte
     alignment only if they are contained in another type, or if they
     have an absolute address.  Otherwise, it assumes they have 4 byte
     alignment.  Specifying this option avoids some rare compatibility
     problems with code generated by other compilers.  It is not the
     default because it results in a performance loss, especially for
     floating point code.

`-mv8'
`-msparclite'
     These two options select variations on the SPARC architecture.

     By default (unless specifically configured for the Fujitsu
     SPARClite), GCC generates code for the v7 variant of the SPARC
     architecture.

     `-mv8' will give you SPARC v8 code.  The only difference from v7
     code is that the compiler emits the integer multiply and integer
     divide instructions which exist in SPARC v8 but not in SPARC v7.

     `-msparclite' will give you SPARClite code.  This adds the integer
     multiply, integer divide step and scan (`ffs') instructions which
     exist in SPARClite but not in SPARC v7.

`-mcypress'
`-msupersparc'
     These two options select the processor for which the code is
     optimised.

     With `-mcypress' (the default), the compiler optimizes code for the
     Cypress CY7C602 chip, as used in the SparcStation/SparcServer 3xx
     series.  This is also apropriate for the older SparcStation 1, 2,
     IPX etc.

     With `-msupersparc' the compiler optimizes code for the SuperSparc
     cpu, as used in the SparcStation 10, 1000 and 2000 series. This
     flag also enables use of the full SPARC v8 instruction set.

   In a future version of GCC, these options will very likely be
renamed to `-mcpu=cypress' and `-mcpu=supersparc'.

   These `-m' switches are supported in addition to the above on SPARC
V9 processors:

`-mmedlow'
     Generate code for the Medium/Low code model: assume a 32 bit
     address space.  Programs are statically linked, PIC is not
     supported.  Pointers are still 64 bits.

     It is very likely that a future version of GCC will rename this
     option.

`-mmedany'
     Generate code for the Medium/Anywhere code model: assume a 32 bit
     text segment starting at offset 0, and a 32 bit data segment
     starting anywhere (determined at link time).  Programs are
     statically linked, PIC is not supported.  Pointers are still 64
     bits.

     It is very likely that a future version of GCC will rename this
     option.

`-mint64'
     Types long and int are 64 bits.

`-mlong32'
     Types long and int are 32 bits.

`-mlong64'
`-mint32'
     Type long is 64 bits, and type int is 32 bits.

`-mstack-bias'
`-mno-stack-bias'
     With `-mstack-bias', GNU CC assumes that the stack pointer, and
     frame pointer if present, are offset by -2047 which must be added
     back when making stack frame references.  Otherwise, assume no
     such offset is present.